![]() So I installed on other USB-Stick Debian10. FreeBSD installation on the DockStar, FreeBSD wiki: Marvell, Update uBoot on your Dockstar, Install Debian Lenny on a Seagate Dockstar, Using Linux on. I can install from source, of course, but Im not sure how to get the source(s) necessary to replace, for example, the apt package 'ntp'. So the problem here is that I am only familiar with installing these sorts of packages using apt, and I need another way. Alternatively, you can choose to install Debian Squeeze with the following commands: cd /tmp wget. Loading file "/boot/uInitrd" from usb device 0:1 (usbda1) Loading file "/boot/uImage" from usb device 0:1 (usbda1) UBIFS error (pid 0): ubifs_get_sb: cannot open "ubi:rootfs", error -19Įrror reading superblock on volume 'ubi:rootfs'! UBI: number of PEBs reserved for bad PEB handling: 17 UBI: VID header offset: 512 (aligned 512) UBI: logical eraseblock size: 129024 bytes UBI: physical eraseblock size: 131072 bytes (128 KiB) ** Unable to read "/rescueme.txt" from usb 0:1 ** Loading file "/rescueme" from usb device 0:1 (usbda1) When I start the new system, so I get this messages:Īrm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2009q3-67) 4.4.1 The problem is, that I can't connect to Dockstar via SSH. What I need to do install a few libraries one time. /debian/ĝownload and run the Debian Wheezy installer: cd /tmp wget chmod +x export PATHPATH:/usr/sbin:/sbin. ![]() # Booting kernel from Legacy Image at 00800000. Image Type: ARM Linux Kernel Image (uncompressed) What can I do? Is it possible to get more messages (change the Debugg-Level)? Image Type: ARM Linux RAMDisk Image (gzip compressed) Image Name: initramfs-5.2.9-kirkwood-tld-1 # Loading init Ramdisk from Legacy Image at 01100000. Then install the 32bit library: sudo apt-get install libXX:i386. To install a 32-bit library libXX, first add the necessary 32bit architecture to your system: sudo dpkg -add-architecture i386. Its available (as a separate package, not part of the default installation) in Debian since wheezy and in Ubuntu since 12.04. Since Ubuntu 11.04 (natty) and Debian 7.0 (wheezy) introduced multiarch support, 32-bit and 64-bit libraries can coexist on one system. Even though U-Boot 2011.12 is not stock u-boot, it is old, and does not support booting with separate DTB.Ĥb. To clone a Debian installation, use the apt-clone utility. Boot with DTB file embedded in the kernel image (no U-Boot envs changes are needed if your system already booting on USB or HDD). Again, this step 4b is for stock U-Boot only. Wheezy install script I&039 ve added a new Wheezy installer, it works just like the old Squeeze installer: cd /tmp wget chmod +x export PATHPATH:/usr/sbin:/sbin. ![]() Please replace kirkwood-goflexnet.dtb below with the correct DTB name for your box. ![]()
0 Comments
Leave a Reply. |